There was a time when people had to get out of their cars and use their muscles to lift their garage door. Thankfully, those days are long gone. Nowadays, most homeowners have the option to mechanise their garage doors. And with a nifty remote control, they can open their door without having to exit their car.
The remote control has a radio frequency that delivers a signal to your garage door openers receiver. Both devices are within the same frequency, allowing them to communicate with each other. So, with the mere press of a button, you can set your garage door in motion. Indeed, the functionality and convenience that this little gadget brings are tremendous. You might even realise how indispensable it is when it stops working properly.
Now, you might wonder if it is time for you to get a new garage door remote control. Well, the answer varies depending on the situation. In some cases, you may need to purchase a new one. However, there are some instances wherein you’ll only need to perform simple troubleshooting steps to get the device working again. In this article, we will discuss if it is time for you to shop for the best garage door remotes Perth has available.
Check the Batteries
In most cases, a garage door remote control stops functioning because it has run out of batteries. So, you should take a set of fresh batteries and replace the old ones. If you need to go to the store to purchase batteries, make sure you take the old ones with you. Doing so will ensure that you can get the right type of batteries. While you’re at it, you should consider buying high-quality batteries. After all, they tend to last longer.
Check the Contacts
You should also check the battery component to see if there are issues with the contacts. If you notice that they are dirty, worn out or wet, then they could be behind the problem. Before you put the batteries in the compartment, make sure that you clean and dry the contacts thoroughly. After inspecting the contacts, check if the remote is working properly.
If your device is not working, try to use your spare remotes. If the other remotes are working, then you’ve concluded that there’s a battery issue with your gadget. However, if none of the remotes function, then you might be dealing with a bigger problem.
Check the Transmitter and the Receiver
You should also check if something is coming into conflict with the receiver. Make sure that you clear the path to enable better communication between your remote and the receiver. While you’re checking the receiver, you should inspect the antenna (if your unit has one). The antenna may be hanging straight down, causing problems in signal transmission. In some cases, adjusting the antenna can be enough to fix the issue.
Check if You Need a Reset
Have you tried the troubleshooting steps, yet none of them got your garage door remote working again? If that is the case, then you might need to reset the opener and the receiver. These devices are like small computers that require a reboot from time to time. We suggest removing the batteries from your remote for about a minute. Unplug the receiver for the same amount of time. Doing so will reset the circuit boards, allowing the remote to start working again.
Contact Professional Garage Door Services for Assistance
On most occasions, it is simple to fix garage door remote issues. It may only take a little effort and inspection on your part. On the other hand, none of the solutions we’ve shared may work. When this happens, then it is time for you to accept that you need a replacement. If you’re unsure about which garage door remote to get, Professional Garage Door Services is here to help.
Contact one of our friendly staff members today and let us find you the appropriate garage door remote!
"Outstanding service from Tony … will recommend him to all my family & friends. Helped me over the phone (on a Sunday) when my roller door stopped working and got it back going again. Cheers"